| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year Warranty and Site Service |
| Warranty: | 1 Years Quality Warranty |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Project | Parameters | |
| Charging system parameters | Latex matrix bin | Effective volume 1.8 m 3 , maximum loadable 2.5t emulsified matrix |
| Sensitizer box | Volume 0.3 m 3 | |
| Flush the water tank | Volume 0.3 m 3 | |
| Hydraulic tank | Volume 0.35m 3 | |
| Charge rate | 40-60 kg/min | |
| Measurement error | ≤±2% | |
| Filling aperture | Φ60mm~Φ90mm | |
| Charging hose | Outer diameter 30 mm ,length 50 m | |
| Working arm | Working arm operating radius | 6.0m |
| Working arm extension length up to arrive 6 Over 1 meter arm swing Angle of movement (horizontal) | 90° ( ±45° ) | |
| Working coverage area | > 30m 2 | |
| Big arm up and down swing angle | +60°/-35° | |
| Arm retraction: | > 2200 mm | |
| Tube feeder | Maximum blasting hole depth | 50m |
| Maximum tube feeding speed | 50m/min | |
| Left and right adjustment | ±45° | |
| Front and rear adjustment | ±10° | |
| Pipe feeding depth measurement accuracy | Cumulative error ≤500mm | |
| Power system | Vehicle Motor | 1000V |
| Protection level | IP65 | |
| On-board cable | 150m | |
| Explosives parameter | Explosive density | 1.00-1.25g/cm 3 |
| Explosive Speed | ≥ 4200m/s( on Ф150PVC In-tube test ) | |
| Chassis parameters | Machine length | 9000mm |
| Machine width | 2060mm | |
| Overall height | 2700mm | |
| (Including charging system) | ||
| Ground clearance | 260mm | |
| weight | Unladen mass | 12000kg |
| Rated load capacity | 2400kg | |
| Full load mass | 14400kg | |
| Walking ability | First gear | 5.0km/h |
| Second gear | 10.9km/h | |
| Third gear | 24.5km/h | |
| Gradeability | 25% | |
| engine | manufacturer | CUMMINS Import |
| model | QSB4.5 | |
| Structural features | Water-cooled diesel engine | |
| Maximum power | 97kW/2300rpm | |
| Maximum Torque | 511Nm/1500rpm | |
| Air Intake System | Dry air filter | |
| Exhaust system | DOC oxidation catalytic purifier + muffler | |
| Starter | 4.8kW/24V | |
| Alternator | 24V/70A | |
| Emissions | conform to USEPA Tier 3 and EU Stage III emission level | |
| Drive System | Torque Converter / Transmission | DANA |
| Model | 1201FT20000 Series | |
| Structural features | Torque converter gearbox integrated, | |
| Power shift, three gears each for forward and reverse | ||
| Drive axle manufacturers | DANA | |
| Structural features | Rigid drive axle with wheel-side planetary reduction | |
| Tire | 10.00-20 TT | |
| Inflation pressure | 7.5bar | |
| steering system | Steering Type | Steering wheel control |
| Structural features | Central articulated, hydraulic power steering | |
| Steering angle | 40° | |
| Turning radius | Inside 4000±200mm , go out 6193±200mm | |
| Hydraulic system | Steering system pressure | 15MPa |
| Steering cylinder | 2 indivual | |
| system | Service brake | Hydraulic brake ( LCB ) |
| Dynamic system | Structural features | Wet multi-disc fully enclosed brake, acting on the drive axle, fully loaded 8km/h When braking, the distance is less than 2m |
| Braking capacity | Spring applied, hydraulically released ( SAHR ) | |
| Parking brake | Full load, >25% | |
| Driver's room | Driving area | Forward facing seat |
| Instrument | Tachometer, preheat indicator, engine temperature gauge, brake Pressure gauge, gearbox pressure gauge, gearbox temperature gauge, brake pressure gauge Power warning light, oil pressure warning light, engine fault alarm. | |
| Safety Features | Driver's cabin | ROPS/FOPS Anti-rollover / anti-smash driver's cab |
| Fire protection device | Car manual fire extinguisher | |
| Starter | Transmission neutral position start | |
| Reversing alarm | 112dB | |
About TMG
Advanced Technology: More than 30 models of vehicle development experience. Our R&D team has rich experience in developing vehicle electrification and intelligentizatio.
Production Capacity: We have our factory and implement ISO9001 production management system to ensure the quality and stability of our equipment.
Mature Supporting System: With the support of and SEM, we specialize in producing underground loaders, underground mining trucks, utility vehicles, mining wheel loaders, etc., to provide customized solutions for worldwide customers.
Extensive Mining Experience: Our company has been engaged in the mining industry for many years and has a better understanding of the actual needs of customers.
1. Q: What kind of terms of payment can be accepted?
A: Normally we can work on T/T, and other terms are also negotiable.
2. Q: Which incoterms 2010 terms can we work?
A: Normally we work on FOB, CFR, CIF, and EXW.
3. Q: What about the delivery time?
A: It depends on the model, usually 1-2 months after receiving the deposit.
4. Q: What about the warranty time?
A: 12 months after shipment, or within 2000 hours of equipment operation, we can provide the free repair service.
5. Q: What about the Minimum Order Quantity?
A: The MOQ is 1 set.
6. Q: Could you stick customers' brands on the products?
A: We warmly welcome the OEM orders.
){kind=link}